Zum Inhalt springen
View in the app

A better way to browse. Learn more.
Fachinformatiker.de

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Nochmal Cisco2600

Gast Chris1981
Gast Chris1981
in Netzwerke

Empfohlene Antworten

Veröffentlicht

ich verzweifel noch mit dem isdn-router

der wählt sich einfach nicht über die BRI-Schnittstelle ein

Call by Call anbieter ist ARCOR

hier die fehlermeldung

vielleicht kann mir einer dazu noch was sagen

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 146.253.1.11, timeout is 2 seconds:

00:04:30064771071: ISDN BR1/0: TX -> SETUP pd = 8 callref = 0x06

00:04:27928235260: Bearer Capability i = 0x8890

00:04:25769803776: Channel ID i = 0x83

00:04:25769803776: Called Party Number i = 0x80, '0192075'

00:04:06: ISDN BR1/0: RX <- SETUP_ACK pd = 8 callref = 0x86

00:04:06: Channel ID i = 0x89

00:04:06: ISDN BR1/0: RX <- DISCONNECT pd = 8 callref = 0x86

00:04:06: Cause i = 0x8281 - Unallocated/unassigned number

00:04:25769803776: ISDN BR1/0: TX. -> RELEASE pd = 8 callref = 0x06

00:04:27928235260: Cause i = 0x8081 - Unallocated/unassigned number

00:04:06: ISDN BR1/0: RX <- RELEASE_COMP pd = 8 callref = 0x86

00:04:34359738368: ISDN BR1/0: TX -> SETUP pd = 8 callref = 0x07

00:04:36518169852: Bearer Capability i = 0x8890

00:04:34359738368: Channel ID i = 0x83

00:04:34359738368: Called Party Number i = 0x80, '0192075'

00:04:08: ISDN BR1/0: RX <- SETUP_ACK pd = 8 callref = 0x87

00:04:08: Channel ID i = 0x89

00:04:08: ISDN BR1/0: RX <- DISCONNECT pd = 8 callref = 0x87

00:04:08: Cause i = 0x8281 - Unallocated/unassigned number

00:04:34359738368: ISDN BR1/0: TX -> RELEASE pd .= 8 callref = 0x07

00:04:36518169852: Cause i = 0x8081 - Unallocated/unassigned number

00:04:08: ISDN BR1/0: RX <- RELEASE_COMP pd = 8 callref = 0x87

00:04:42949672960: ISDN BR1/0: TX -> SETUP pd = 8 callref = 0x08

00:04:45108104444: Bearer Capability i = 0x8890

00:04:42949672960: Channel ID i = 0x83

00:04:42949672960: Called Party Number i = 0x80, '0192075'

00:04:10: ISDN BR1/0: RX <- SETUP_ACK pd = 8 callref = 0x88

00:04:10: Channel ID i = 0x89

00:04:10: ISDN BR1/0: RX <- DISCONNECT pd = 8 callref = 0x88

00:04:10: Cause i = 0x8281 - Unallocated/unassigned number

00:04:42949672960: ISDN BR1/0: TX -> RELEASE pd .= 8 callref = 0x08

00:04:45108104444: Cause i = 0x8081 - Unallocated/unassigned number

00:04:10: ISDN BR1/0: RX <- RELEASE_COMP pd = 8 callref = 0x88

00:04:51539607552: ISDN BR1/0: TX -> SETUP pd = 8 callref = 0x09

00:04:53698039036: Bearer Capability i = 0x8890

00:04:51539607552: Channel ID i = 0x83

00:04:51539607552: Called Party Number i = 0x80, '0192075'

00:04:12: ISDN BR1/0: RX <- SETUP_ACK pd = 8 callref = 0x89

00:04:12: Channel ID i = 0x89

00:04:12: ISDN BR1/0: RX <- DISCONNECT pd = 8 callref = 0x89

00:04:12: Cause i = 0x8281 - Unallocated/unassigned number

00:04:51539607552: ISDN BR1/0: TX -> RELEASE pd .= 8 callref = 0x09

00:04:53698039036: Cause i = 0x8081 - Unallocated/unassigned number

00:04:12: ISDN BR1/0: RX <- RELEASE_COMP pd = 8 callref = 0x89

00:04:60129542144: ISDN BR1/0: TX -> SETUP pd = 8 callref = 0x0A

00:04:62287973628: Bearer Capability i = 0x8890

00:04:60129542144: Channel ID i = 0x83

00:04:60129542144: Called Party Number i = 0x80, '0192075'

00:04:14: ISDN BR1/0: RX <- SETUP_ACK pd = 8 callref = 0x8A

00:04:14: Channel ID i = 0x89

00:04:14: ISDN BR1/0: RX <- DISCONNECT pd = 8 callref = 0x8A

00:04:14: Cause i = 0x8281 - Unallocated/unassigned number

00:04:60129542144: ISDN BR1/0: TX -> RELEASE pd .

Success rate is 0 percent (0/5)

Cisco2610#= 8 callref = 0x0A

00:04:62287973628: Cause i = 0x8081 - Unallocated/unassigned number

00:04:14: ISDN BR1/0: RX <- RELEASE_COMP pd = 8 callref = 0x8A

ich hab zwar nicht so die grosse ahnung aber, es scheint mir so als ob die nummer von arcor irgendwie, irgendwo nich akzeptiert wird oder nicht vorhanden ist

(unallocated/unassigned number)

also neuigkeiten

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

00:04:68719476735: BRI1/0: Wrote command 0x1B to SID

00:04:64424509440: BRI1/0: Wrote command 0x15 to SID

00:04:64424509440: BRI1/0: Wrote command 0x17 to SID

00:04:64424509440: BRI1/0: Wrote command 0x1 to SID

00:04:64424509440: BRI1/0: Wrote command 0x0 to SID

00:04:64424509440: BRI1/0: Wrote command 0x20 to SID

00:04:64424509440: BRI1/0: Starting PUP timer, move state from F2 to F3

00:04:15: BRI1/0: Wrote command 0x92 to SID

00:04:15: BRI1/0: Wrote command 0x93 to SID

00:04:15: BRI1/0: state .F3, IS F2, event PUP timeout

00:04:15: BRI1/0: Wrote command 0x3 to SID

00:04:15: BRI1/0: Starting T3 timer on PUP timer expiry, changing state F3 to F4

...

00:04:98784247808: ISDN BR1/0: Could not bring up interface

00:04:98784247808: BRI1/0: Ignore the activation request at state F4

00:04:23: BRI1/0: Wrote command 0x92 to SID

00:04:23: BRI1/0: Wrote command 0x93 to SID

00:04:23: BRI1/0: state F4, IS F5, event T3 timeout

00:04:23: BRI1/0: Wrote command 0x92 to SID

00:04:23: BRI1/0: Wrote command 0x93 to SID

00:04:23: BRI1/0: Wrote command 0x1 to SID

00:04:23: BRI1/0: Wrote command 0x0 to SID

00:04:23: BRI1/0: Forcing SID interrupt for status 0xF

00:04:23: save this sid_status (0xF)

00:04:23: BRI1/0: T3 timer expired, changing state F4 to F2

00:04:100942679060: BRI1/0:1: Disabled channel B1

00:04:100942679384: BRI1/0: Wrote command 0x15 to SID

00:04:98784247808: BRI1/0:2: Disabled channel B2

00:04:98784247808: BRI1/0: Wrote command 0x17 to SID

00:04:98784247808: ISDN BR1/0: Could not bring up interface.

Success rate is 0 percent (0/5)

also die config

! ******************************************************************

! Cisco2610.cfg - Cisco router configuration file

! Automatically created by Cisco ConfigMaker v2.6 Build 6

! Freitag, 22. November 2002, 08:12:26

!

! Hostname: Cisco2610

! Model: 2610

! ******************************************************************

!

service timestamps debug uptime

service timestamps log uptime

service password-encryption

no service tcp-small-servers

no service udp-small-servers

!

hostname Cisco2610

!

enable password *****

!

ip name-server 145.253.2.11

!

isdn switch-type basic-net3

!

ip subnet-zero

ip domain-lookup

ip routing

!

interface Dialer 1

description connected to Internet

ip address negotiated

ip nat outside

no ip split-horizon

encapsulation ppp

dialer in-band

dialer idle-timeout 10

dialer string 00192075

dialer hold-queue 10

dialer-group 1

ppp authentication chap pap callin

ppp chap hostname arcor-ibc

ppp chap password *****

ppp pap sent-username arcor-ibc password *****

no ppp multilink

no cdp enable

!

interface Ethernet 0/0

no shutdown

description connected to EthernetLAN

ip address 192.168.1.1 255.255.255.0

ip nat inside

keepalive 10

!

interface BRI 1/0

no shutdown

description connected to Internet

no ip address

dialer rotary-group 1

!

interface BRI 1/1

no description

no ip address

shutdown

!

interface BRI 1/2

no description

no ip address

shutdown

!

interface BRI 1/3

no description

no ip address

shutdown

!

interface BRI 1/4

no description

no ip address

shutdown

!

interface BRI 1/5

no description

no ip address

shutdown

!

interface BRI 1/6

no description

no ip address

shutdown

!

interface BRI 1/7

no description

no ip address

shutdown

!

! Access Control List 1

!

no access-list 1

access-list 1 permit 192.168.1.0 0.0.0.255

!

! Dialer Control List 1

!

no dialer-list 1

dialer-list 1 protocol ip permit

!

! Dynamic NAT

!

ip nat translation timeout 86400

ip nat translation tcp-timeout 86400

ip nat translation udp-timeout 300

ip nat translation dns-timeout 60

ip nat translation finrst-timeout 60

ip nat inside source list 1 interface Dialer 1 overload

!

router rip

version 2

network 192.168.1.0

passive-interface Dialer 1

no auto-summary

!

!

ip classless

!

! IP Static Routes

ip route 0.0.0.0 0.0.0.0 Dialer 1

no ip http server

snmp-server community public RO

no snmp-server location

no snmp-server contact

!

line console 0

exec-timeout 0 0

password *****

login

!

line vty 0 4

password *****

login

!

end

Auf den ersten Blick siehts ok aus. Aber wenn ich das richtig sehe, hast Du eine TK-Anlage zwischen Dir und dem Rest der Welt. Hast Du eine Moeglichkeit, das mal ohne TK-Anlage zu versuchen (bzw. was macht die TK mit 019xxx Nummern?)

Nic

ohne TK-anlage geht nicht

hier wurde mir aber gesagt, das die 019.. nummern nicht gesperrt sind

keine ahnung was ich noch tun kann

ja hab schon rebootet

hab da ja auch wenig ahnung von, power up timer expired==== ?????????

noch mehr fehlermeldungen

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

00:10:55: Dialer1 DDR: No free dialer - starting fast idle timer.

00:10:57: Dialer1 DDR: No free dialer - starting fast idle timer.

00:10:59: Dialer1 DDR: No free dialer - starting fast idle timer.

00:11:01: Dialer1 DDR: No free dialer - starting fast idle timer.

00:11:03: Dialer1 DDR: No free dialer - starting fast idle timer.

Success rate is 0 percent (0/5)

das wird schwierig, cisco hat so nen ******* support

da kriegste auch nichts raus

Originally posted by Chris1981

noch mehr fehlermeldungen

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

00:10:55: Dialer1 DDR: No free dialer - starting fast idle timer.

00:10:57: Dialer1 DDR: No free dialer - starting fast idle timer.

00:10:59: Dialer1 DDR: No free dialer - starting fast idle timer.

00:11:01: Dialer1 DDR: No free dialer - starting fast idle timer.

00:11:03: Dialer1 DDR: No free dialer - starting fast idle timer.

Success rate is 0 percent (0/5)

das wird schwierig, cisco hat so nen ******* support

da kriegste auch nichts raus

Das mit dem Support kommt immer drauf an wo man sucht. Im Netz findest Du bei Cisco eigentlich alles. Für Deinen Fall zum Beispiel hier:

Configuring and Troubleshooting Dialer Profiles

Da findest Du auch Deine Fehlermeldung oben wieder. Dein Dialer Profile ist nicht auf ein physikalisches Interface gebunden. Versuchs mal mit der Konfiguration eines Dialer-Pools.

Näheres dazu findest Du auf der oben genannten Seite.

Die Rotary-Group die bei Dir konfiguriert ist hilft Dir nicht weiter da sie dazu benutzt wird mehrer physikalische Interface zu einem zu bündeln.

Die Dialer-Group auf dein Interface Dialer1 mappt jediglich den Interesting-Traffic aus der Dialer-List 1 auf das Interface.

Konfigurierst Du also jetzt noch den Dialer Pool und bindest damit das virtuelle Dialer-Interface auf das physikalische BRI-Interface sollte es schon besser aussehen.

CU

Ich hatte vor einiger Zeit schon mal eine Beispielkonfiguration gepostet (--> Suchfunktion). Es sollte reichen, "dialer pool-member 1" auf dem Bri zu konfigurieren und "dialer pool 1" auf dem dazugehoerigen Dialer Interface.

Nic

Erstelle ein Konto oder melde dich an, um einen Kommentar zu schreiben.

Zur Themenliste gehen

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.