snmp protokollierte load mit mrtg visualisieren

[Jaraz]

Hi,

was für ein Titel

Also ich logge die Server Load über snmp.

snmpwalk gibt folgendes aus!

snmpwalk -v 1 localhost public .1.3.6.1.4.1.2021.10

enterprises.ucdavis.laTable.laEntry.laIndex.1 = 1

enterprises.ucdavis.laTable.laEntry.laIndex.2 = 2

enterprises.ucdavis.laTable.laEntry.laIndex.3 = 3

enterprises.ucdavis.laTable.laEntry.laNames.1 = Load-1

enterprises.ucdavis.laTable.laEntry.laNames.2 = Load-5

enterprises.ucdavis.laTable.laEntry.laNames.3 = Load-15

enterprises.ucdavis.laTable.laEntry.laLoad.1 = 0.04

enterprises.ucdavis.laTable.laEntry.laLoad.2 = 0.06

enterprises.ucdavis.laTable.laEntry.laLoad.3 = 0.12

enterprises.ucdavis.laTable.laEntry.laConfig.1 = 12.00

enterprises.ucdavis.laTable.laEntry.laConfig.2 = 14.00

enterprises.ucdavis.laTable.laEntry.laConfig.3 = 14.00

enterprises.ucdavis.laTable.laEntry.laLoadInt.1 = 4

enterprises.ucdavis.laTable.laEntry.laLoadInt.2 = 5

enterprises.ucdavis.laTable.laEntry.laLoadInt.3 = 11

enterprises.ucdavis.laTable.laEntry.laLoadFloat.1 = Opaque: Float: 0.040000

enterprises.ucdavis.laTable.laEntry.laLoadFloat.2 = Opaque: Float: 0.060000

enterprises.ucdavis.laTable.laEntry.laLoadFloat.3 = Opaque: Float: 0.120000

enterprises.ucdavis.laTable.laEntry.laErrorFlag.1 = 0

enterprises.ucdavis.laTable.laEntry.laErrorFlag.2 = 0

enterprises.ucdavis.laTable.laEntry.laErrorFlag.3 = 0

enterprises.ucdavis.laTable.laEntry.laErrMessage.1 =

enterprises.ucdavis.laTable.laEntry.laErrMessage.2 =

enterprises.ucdavis.laTable.laEntry.laErrMessage.3 =

Wie kann ich das jetzt mit mrtg visualisieren? die mrtg.conf sieht so aus:

### Global Config Options


#  for Debian

WorkDir: /var/www/mrtg


#  or for NT

# WorkDir: c:\mrtgdata


### Global Defaults


#  to get bits instead of bytes and graphs growing to the right

# Options[_]: growright, bits



######################################################################

# System: xyz.pureserver.info

# Description: Linux xyz.pureserver.info 2.4.18-bf2.4 #1 Sun Feb 1 08:22:42 MST 2004 i686

# Contact: Root <root@localhost> (configure /etc/snmp/snmp.local.conf)

# Location: Unknown (configure /etc/snmp/snmp.local.conf)

######################################################################



### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: '' ###

### The following interface is commented out because:

### * it is a Software Loopback interface

#

# Target[222.160.132.311_1]: 1:public@222.160.132.311:

# SetEnv[222.160.132.311_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo"

# MaxBytes[222.160.132.311_1]: 1250000

# Title[222.160.132.311_1]: Traffic Analysis for 1 -- xyz.pureserver.info

# PageTop[222.160.132.311_1]: <H1>Traffic Analysis for 1 -- xyz.pureserver.info</H1>

#  <TABLE>

#    <TR><TD>System:</TD>     <TD>xyz.pureserver.info in Unknown (configure /etc/snmp/snmp.local.conf)</TD></TR>

#    <TR><TD>Maintainer:</TD> <TD>Root <root@localhost> (configure /etc/snmp/snmp.local.conf)</TD></TR>

#    <TR><TD>Description:</TD><TD>lo  </TD></TR>

#    <TR><TD>ifType:</TD>     <TD>softwareLoopback (24)</TD></TR>

#    <TR><TD>ifName:</TD>     <TD></TD></TR>

#    <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>

#    <TR><TD>Ip:</TD>         <TD>127.0.0.1 (localhost)</TD></TR>

#  </TABLE>



### Interface 2 >> Descr: 'eth0' | Name: '' | Ip: '222.160.132.311' | Eth: '00-20-ed-3a-37-e2' ###


Target[222.160.132.311_2]: 2:public@222.160.132.311:

SetEnv[222.160.132.311_2]: MRTG_INT_IP="222.160.132.311" MRTG_INT_DESCR="eth0"

MaxBytes[222.160.132.311_2]: 1250000

Title[222.160.132.311_2]: Traffic Analysis for 2 -- xyz.pureserver.info

PageTop[222.160.132.311_2]: <H1>Traffic Analysis for 2 -- xyz.pureserver.info</H1>

 <TABLE>

   <TR><TD>System:</TD>     <TD>xyz.pureserver.info in Unknown (configure /etc/snmp/snmp.local.conf)</TD></TR>

   <TR><TD>Maintainer:</TD> <TD>Root <root@localhost> (configure /etc/snmp/snmp.local.conf)</TD></TR>

   <TR><TD>Description:</TD><TD>eth0  </TD></TR>

   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>

   <TR><TD>ifName:</TD>     <TD></TD></TR>

   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>

   <TR><TD>Ip:</TD>         <TD>222.160.132.311 (xyz.pureserver.info)</TD></TR>

 </TABLE>

Gruß Jaraz

PS: Die falsche IP ist absicht.

[Jaraz]

Falls es jemanden interessiert, was ich bei 2 Mitgliedern die bis jetzt hier gelesen habe, bezweifle.

Target[server-cpu]: 1.3.6.1.4.1.2021.10.1.5.2&1.3.6.1.4.1.2021.10.1.5.2:public@222.111.222.111:

MaxBytes[server-cpu]: 10000

Title[server-cpu]: host.de CPU Load (5 minute average)

YLegend[server-cpu]: load

ShortLegend[server-cpu]: load

Legend1[server-cpu]: CPU Load * 100

Legend2[server-cpu]:

LegendI[server-cpu]: CPU Load * 100

LegendO[server-cpu]:

PageTop[server-cpu]: host.de 5-minute average CPU Load

Options[server-cpu]: gauge,nopercent,integer,growright